7. TEMPERaTURE MaNaGEMENT IN INV MODE
The modulating Comando Remoto manages 2 ambient temperature setpoints: a Comfort level and an Economy
level.
The range of settable values for the two levels is as follows:
• The Economy setpoint can go from NOFRX +0,5 °C to the Comfort setpoint value – 0.5°C;
• The Comfort setpoint can go from the Economy setpoint value + 0.5°C up to 30°C.
When the selected operation status is INV, and therefore both the heating and DHW circuits are active, use the button
to select one of the following 3 ambient setpoint management modes:
Mode
Icons
Description
AUTO
The ambient setpoint is managed according to the time programming settings. The time programming
indication icons are active.
COMF
Manual mode. The active setpoint is Comfort, regardless of the time band.
ECO
Manual mode. The active setpoint is Economy, regardless of the time band.
The value of the currently active setpoint can be viewed and modified using the buttons
resolution of 0.5°C.
8. DHW sETPOINT aDjUsTMENT
When the Comando Remoto is in INV or EST mode, it is possible to view and modify the DHW circuit setpoint
value.
To access the variation mode, press the button
and
with a resolution of 1°C.
The DHW setpoint variation range is a parameter communicated by the boiler card.
; therefore the value can be modified with the buttons
cod. 3542A990 - Rev 01 - 03/2022
and
, with a
71
EN