Lamborghini Caloreclima CRONO REM Manuel De L'utilisateur page 79

10.4 PaRaM
The PARAM submenu is accessible with 2 different levels: a UsER level and an INsTaLLER level, which allow
access and modification of different parameters. In particular, with the INsTaLLER level all the parameters visible
from the UsER level are accessible, plus further parameters.
The default access to the PaRaM submenu occurs at the UsER level.
To access the INsTaLLER,level, from the PROG menu press the buttons
Activation of the level is indicated by the message INsT in the upper digits.
The list of parameters that can be viewed and/or modified in the two levels is as follows:
Code displayed Description
COMFR Comfort level setpoint
ECONM
Economy level setpoint
NOFRX Frost protection activation threshold
CH sL Boiler flow setpoint with weather compensation disabled
CHMaX
Flow maximum setpoint
CHMIN Flow minimum setpoint
Activation of ambient probe integrated into the
Comando Remoto:
aMBON 0 = probe not active - 1 = probe active.
(4)
If the probe is not active, the Comando Remoto manages the
boiler flow setpoint directly.
cod. 3542A990 - Rev 01 - 03/2022
and at the same time.
Min Max
ECONM + 0.5 °C 30°C
NOFRX + 0.5 °C COMFR – 0,5°C
0°C ECONM – 0,5°C
CHMIN CHMAX
CHMIN (2)
(3) CHMAX
0 1
EN
79