Amitek AKD100W Manuel D'installation, Utilisation Et Entretien page 33

The following characteristics are normal and do not represent malfunctions:

At regular intervals the temperature indicated on the digital control unit display increases by 4-
5 degrees with respect to the set-point and then decreases: this is part of the normal cooling
cycle of any refrigerating appliance. See the detailed explanation in sect. 5.4;

The sound of flowing water. This sound occurs during normal use. It is the sound of the coolant
expanding inside the cooling circuit;

When there is high humidity, condensate on the internal part of the door is normal. Remove
the condensate by wiping it off with a soft cloth.
Requesting spare parts:
To request spare parts, contact the dealer and refer to the part number, as indicated
in the spare parts drawings at the end of this handbook. At the same time, provide the
model and serial number of the appliance, as indicated on the technical specs. label
(ref. Pic.1 and Pic.2 - Chap.8).
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS
- 33 -