Grundig M 2050 BT Mode D'emploi page 28

SETTINGS
­ - --------------------------------------------------------------------------------------------------------------------------------------
Tuning­and­storing­DAB­radio­
stations
Note:
Make the settings with the buttons on the re-
7
mote control.
Initial­setup
When the device is connected to the mains for
the first time or after a reset, the device starts an
automatic station search for DAB radio stations
and then stores them in the station list.
1 Switch on the hi-fi system by pressing
DAB«.
– Display: » Hello « briefly, followed by
» DAB « and then » SCANNING «.
– The automatic station search starts and finds
and stores DAB radio stations.
– Then the device switches to the first station in
the station list.
Note:
If there is no antenna signal, » OFF AIR « is
7
displayed.
Storing­DAB­radio­stations­as­presets
After the automatic station search, all the DAB
radio stations in are stored in the station list. You
can store your favourite DAB radio stations on
the presets 1 to 40.
1 Select a DAB radio station by pressing »
or » «.
4
2 Save a DAB radio station as a preset by press-
ing »PROG«, selecting the preset with »
or » « and then press »PROG« to save.
– Display: » STORED «.
Note:
You can also select the preset with the number
7
buttons »1­...­0«.
For two-digit preset numbers, first press
»10+« or select the preset double-digit with
the numeric buttons.
3
To save more DAB radio stations, repeat steps
1 and 2.
28­
ENGLISH
All manuals and user guides at all-guides.com
»FM/
3
Add­DAB­radio­stations­after­a­
change­of­location
You can restart the automatic station search. This
is useful if you want to operate the device at a
new location or if you want to search for new
DAB radio stations.
1
Switch on the hi-fi system by pressing
DAB«.
– Display: the name of the radio station, such
as » B5 AKTUELL «.
2
Open the menu by pressing »
3 Select the » FULL SCAN « menu item with
» « or »
3 4
– Display: » SCANNING «, the automatic sta-
tion search starts, then finds and stores ra-
dio stations in the station list.
Setting­and­storing­DAB­radio­
manually
1
Switch on the hi-fi system by pressing
DAB«.
2 Open the menu by pressing »
3 Select the » MANUAL « menu item with »
or » « and press »
4
– Display: e.g. » 5A I74.928 « (channel
and frequency of a DAB radio station).
4
Set the frequency/channel by pressing »
«
or » « on the remote control.
4
5
Confirm the frequency/channel with »
– The reception level is displayed.
«
6 Confirm the setting with »
– The DAB radio stations are stored in the sta-
tion list.
«.
7
« and press » e II« to confirm.
«.
7
e II« to confirm.
e II«.
»FM/
»FM/
«
3
«
3
II«.
e