Publicité
Les langues disponibles
Les langues disponibles
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level ................................................................................................. LpA = 77,4 dB(A) with load
- Sound power level ..................................................................................................... LWA = 90,4 dB(A) with load
- Uncertainty of measurement .................................................................................................................... K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade and the material
to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far as the saw blade is
concerned, it is preferable to use silenced type of blades and to keep them in good conditions. We recommend to
use the correct saw blade and to keep firmly the workpiece to be cut.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine safely if other
precautions are necessary. The factors that can influence the actual exposure level of the operator include
exposure length, environment features and other sources of noise, as for example the number of machines and
operations present. Besides, exposure levels can change from country to country. However, these instructions
enable the user of the machine to better evaluate the dangers and risks.
Your bandsaw is delivered complete in a package. Remove carefully the table saw and all the parts from the
packaging, check if there are any missing or damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency and the safety of
the machine. To change faulty parts consult an after sales centre.
To make the table saw perfectly work you must assemble the various parts, for which you can find a detailed
explanation later on.
We recommend you to read carefully the assembly instructions and to follow them to the letter. The following photo
illustrates the bandsaw and all the parts included in the packaging.
List of parts included in the package:
-
One bandsaw complete with blade (assembled)
-
One workbench
-
One sliding rail for the rip fence
-
One rip fence
-
One coupling for a dust collection device
-
One pusher
-
4 legs
-
8 bars
-
Various nuts and bolts
All manuals and user guides at all-guides.com
EN
NOISE CONDITIONS
REMOVAL OF PACKAGE
26
Publicité
