Fox F28-186A Traduction D'original page 31

All manuals and user guides at all-guides.com
EN
EXTENSION CABLES
Only use three conductors extension cables, with a plug with two plugs and a earthing contact and sockets with
two holes and a earth corresponding to the plug of the tool. When using an electric tool at a remarkable distance
from the power supply, use an extension cable with sufficient dimensions to transport the current which the tool
needs. If the extension cable has not the sufficient dimensions a voltage drop can occur, thus causing an
overheating and a voltage loss. You can only use extension cables which are in compliance with CE standards.
Extension cable length: up to 15 m
Cable dimensions: 3 x 2,5 mm²
Before using any kind of extension cable, check that it has not bare wires and that the insulation is not cut or
worn. Repair and change immediately it if it is damaged or worn.
WARNING:
Extension cables must be arranged away from the working area in order that they do not get in touch with the
workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
RECOMMENDED USE
This bandsaw has been manufactured for cross cutting and trimming of plastics, wood.
Maximum cutting height is 170 mm with the workbench at 0°.
The workbench can be inclined up to 45° to angle cut.
TECHNICAL SPECIFICATIONS
Engine power: ................................................................................................................................................. 420 W
Voltage and frequency: ....................................................................................................................... 230 V – 50 Hz
Blade rotational speed: ...................................................................................................................... 660/960 m/min
Blade's length: ........................................................................................................................................... 1790 mm
Blade's width: ............................................................................................................................................ 6 - 13 mm
Gooseneck: ................................................................................................................................................... 244 mm
Maximum cutting height: ............................................................................................................................... 120 mm
Workbench inclination capacity: ......................................................................................................... from 0° to 45°
Workbench dimensions: ....................................................................................................................... 290x290 mm
Weight: ............................................................................................................................................................. 30 kg
25