Siemens SEALB Instructions D'installation

s
Stored Energy Operator
Accionamiento motor con acumulador de energía
Commande motorisée à accumulation d'energie
(avec déclencheur electrique et mecanique)
Installation Instructions / Instructivo de Instalación
Hazardous Voltage Hazardous Voltage
Will cause death or serious injury Will cause death or serious injury
Turn off and lock out all power supplying this device before Turn off and lock out all power supplying this device before
working on this device. working on this device.
Replace all covers before power supplying this device is Replace all covers before power supplying this device is
turned on. turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover all details or variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be desired or
should particular problems arise, which are not covered sufficiently for the purchaser's purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction manual shall not become part of or modify any
prior or existing agreement, commitment or relationship. The sales contract contains the entire obligation of Siemens. The
warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained herein
do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens
Industry, Inc. The remaining trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
SEALB 3VL9400-3MJ01 = 24 Vdc
SEALM 3VL9400-3ML01 = 42-48 V ac/dc
SEALY 3VL9400-3MS01 = 60 V ac/dc
SEALN 3VL9400-3MN01 = 110-127 V ac/dc
SEALR 3VL9400-3MQ01 = 220-250 V ac/dc
JG / LG
M4 X 20mm
M4 X 12mm
8 0 6 8 4 1 A 0 2
Euro Order No.
U.S. Cat. No.
Item:
SEALB 3VL9400-3MJ01
SEALM 3VL9400-3ML01
SEALY 3VL9400-3MS01
SEALN 3VL9400-3MN01
SEALR 3VL9400-3MQ01
Tensión peligrosa. Tensión peligrosa.
Puede causar la muerte o lesiones graves. Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio. Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de Reemplace todas las barreras y cubiertas antes de
energizar el interruptor. energizar el interruptor.
Cal. ISO 6789
SEAMB
SEAMM
SEAMY
SEAMN
SEAMR
M4 x 20mm
1 / 8
U.S. Cat. No.
SEAMB
SEAMM
SEAMY
SEAMN
SEAMR
For Use With Frame JG, LG, MG
Para Usar Con Caja Base JG, LG, MG
Tension dangereuse. Tension dangereuse.
Danger de mort ou risque de blessures graves. Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de Couper l'alimentation de l'appareil et barrer avant de
travailler. travailler.
Remplacez touts les couverts avant que Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté. l'approvisionnement de pouvoir soit alimenté.
3VL9600-3MJ01 = 24 Vdc
3VL9600-3ML01 = 42-48 V ac/dc
3VL9600-3MS01 = 60 V ac/dc
3VL9600-3MN01 = 110-127 V ac/dc
3VL9600-3MQ01 = 220-250 V ac/dc
M4 X 10mm
Euro Order No.
3VL9600-3MJ01
3VL9600-3ML01
3VL9600-3MS01
3VL9600-3MN01
3VL9600-3MQ01
MG
I.L. No. 806841A02