Rinnai Q85SN Instructions D'installation Et D'entretien page 61

OPEN
Opening air box figure 32
14.2.1 Visual inspection for general signs of corrosion
14.2.2 Measuring the ionization current
14.2.3 Measuring the inlet gas pressure
14.2.4 Testing for gas leaks
14.2.5 Carrying out a pressure test of the heating system
14.2.6 Checking venting systems
All manuals and user guides at all-guides.com
The air box
- remove the transparant air box (figure 32);
- clean the box with a cloth with a simple (non-abrasive) cleaning agent;
- Check all gas and water pipes for signs of corrosion.
- Replace any pipes that are corroded.
See subsection 13.5 "Measuring the ionization current".
See subsection 6.4.1 and .2 "Gas connection with natural gas" and "Gas connection
with propane".
See subsection 13.1 "Testing for gas leaks".
See chapter 10.2 "Filling the heating system".
Check the following points:
- Is the prescribed combustion air/flue system used?
- Have the instructions for configuring the flue system as specified in the relevant
Installation instruction for the flue gas system been observed?
- Check air intake and flue gas for obstruction or damage.
61