Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
• Always unplug the appliance before cleaning it.
een the
• Clean the surface of the appliance using a soft cloth, do not use any water.
• If the appliance is very dirty, clean the surface using a damp cloth (add a non-corrosive cleaning product if required.
ources.
• Do not use corrosive detergents, corrosive solvents or chemical products.
• Do not use an abrasive sponge, scouring pad or hard brush to clean the appliance.
• Do not immerse the main body of the appliance into water.
• Ensure that the motor and the other electrical components do not come into contact with water.
• If the appliance is not to be used for a long period, pack it away carefully. Store it in a dry and ventilated area where it will
not be affected by dust.
• To avoid an excessive build-up of dust on the filter affecting the way the blower works, clean the filter on a monthly basis.
• To ensure that the appliance keeps operating efficiently, it is necessary to wash the filter every week that it is used.
• The filter of the evaporator can be removed as shown in fig. 22. The condensation filters consist of two parts.
• Step 1: Remove the filter as shown in Fig. 23.
• Step 2: Remove the other filter as shown in Fig. 24-25.
Fig. 22
• Use a vacuum cleaner to remove any dust that has accumulated on the filter. If the filter is very dirty, put it into hot water
and rinse it several times. The temperature of the water should not be higher than 40°C (104°F). After washing it, leave the
filter to dry then attach the entrance intake grill to the appliance.
THIS APPLIANCE IS SOLELY DESIGNED FOR DOMESTIC USE
e lid to
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 47
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 47
Fig. 23
Fig. 24
FR
Fig. 25
25/01/21 11:39
25/01/21 11:39
EN
47
Publicité
