Publicité
Les langues disponibles
Les langues disponibles
Setting the appliance to switch off
• When the appliance is operating, press the
will flash together (Fig. 9)
• Press the button several times until the time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
• To cancel the programme, press the
screen.
CHANGE UNIT OF TEMPERATURE
umidity.
When the appliance is in standby mode, press the
arantee
is new
Fig. 12
Before modification, in Cold mode, the screen will appear as in Fig. 12.
After modification, in Cold mode, the screen will appear as in Fig. 13.
mption
e.
will be
bol will
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 43
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 43
button. The screen will display 1-24 hours and the
symbol will be displayed on the screen (Fig. 10).
button again or press the
button for 20 seconds. You can then change the unit of temperature.
Fig. 13
,
button. The
symbol will disappear from the
FR
EN
and
symbols
43
25/01/21 11:39
25/01/21 11:39
Publicité
