Publicité
Les langues disponibles
Les langues disponibles
OSCILLATION
This function is useful for selecting the angle or oscillation mode of the deflector: air flow upwards or downwards
Position of the deflector in oscillation mode
To set this option correctly:
• S elect use mode (air-conditioner, dehumidifier, fan) as described above.
• Then press the
button on the remote control to set automatic oscillation by the deflector
NIGHT MODE
This function is useful during the night as it reduces the appliance's power consumption.
To set this function correctly:
• Select the air-conditioner or dehumidifier mode as described above.
• Press the
.button.
• The appliance will function in the mode previously selected.
• When you select night mode, the brightness of the screen is reduced.
Night mode allows you to maintain a constant temperature in a room without major fluctuations in temperature or humidity.
The fan speed will remain low while the temperature and humidity level of the room will only change gradually to guarantee
the highest possible level of comfort.
In AIR-CONDITIONER mode, the selected temperature will increase by 1°C per hour over a period of 2 hours. This new
temperature level will then be maintained for the following 6 hours. The appliance will then switch itself off.
NIGHT mode can also be cancelled at any time during use by pressing the
In FAN mode, the NIGHT function cannot be set.
PROGRAMMING
Setting the timer
This timer can be used to set the appliance to switch on or off at a chosen time. This will allow you save on power consumption
by optimising the periods when it is in use.
Setting the appliance to switch on
• Switch the appliance on.
• Choose the mode you want to use, such as AIR-CONDITIONER mode set to 24°C at maximum fan speed, for example.
• Then switch the appliance off.
• Press the
button. The screen will display 1-24 hours and the
• Press
several times until amount of time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
• To cancel the programme that has been set, press the button
disappear from the screen.
42
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 42
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 42
symbol will be displayed on the screen (Fig. 8).
or
or
buttons.
,
and
will flash together (Fig. 7).
again or press the
button. The
FR
EN
Setting
• Whe
will
• Pres
activ
• To c
scre
C
Wh
Before
After m
symbol will
25/01/21 11:39
25/01/21 11:39
Publicité
