REMOTE CONTROL
• Point the remote control towards the sensor on the appliance.
• The remote control must not be operated more than 7 metres from the appliance (without any obstacles between the
remote control and the sensor).
• The remote control must be operated with care. Do not let it fall to the ground, do not expose it to sunlight or heat sources.
If the remote control is not working, try removing and then reinstalling its battery.
The remote control is supplied with a battery already fitted.
To use the remote control, for the first time, gently pull the transparent plastic film out of the battery compartment.
REPLACING THE BATTERY
To replace the battery, carry out the following instructions, using the illustration to help you:
Pin
Cover hole
1 Insert a safety pin or any other accessory with a fine tip into the hole on the lid and, at the same time, pull on the lid to
remove it.
2 Replace the worn battery with a CR2025 battery.
3 Then correctly replace the lid onto the remote control.
46
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 46
Manual_Snowair9HE-9HEP-12HE-12HEP_2021.indd 46
Plastic film can be pulled
off
Battery
FR
EN
C
• Alwa
• Clea
• If th
• Do n
• Do n
• Do n
• Ensu
• If th
not b
• To a
• To e
• The
• Step
• Step
• Use
and
filter
THIS A
25/01/21 11:39
25/01/21 11:39