Philips HQ 5866 Mode D'emploi page 6

ENGLISH
8
C
1
2
C
C
C
C
1
2
All manuals and user guides at all-guides.com
3 Turn the wheel anticlockwise and remove
the retaining frame.
4 Remove and clean the shaving heads (cutter
and guard) one by one.
Do not mix up the cutters and the guards.
This is essential since grinding of the cutters in the
guards only ensures optimal performance for each
individual set. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the short-bristled side
of the brush.
Brush carefully in the direction of the arrow.
6 Brush the guard.
If necessary, you can clean the shaving unit with a
degreasing liquid (e.g. alcohol). Remember to
lubricate the central point of the guards with a drop
of sewing machine oil after cleaning.
7 Reassemble the shaving unit: press the wheel
and turn it clockwise.
8 Place the shaving unit back onto the shaver.