Accessories; Standard Accessories; Optional Accessories - Metabo HPT G 18SE3 Instructions De Sécurité Et Mode D'emploi

English
6. Service parts list
CAUTION
Repair, modifi cation and inspection of metabo HPT
Power Tools must be carried out by an metabo HPT
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the metabo HPT Authorized Service Center
when requesting repair or other maintenance. In
the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
WARNING
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or attachments not
intended for use such as cup wheel, cut-off wheel or saw blade is dangerous and may
cause personal injury or property damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

○ Wrench (Code No. 937913Z) ...................................1
○ Side Handle (Code No. 994322) ..............................1
OPTIONAL ACCESSORIES...sold
separately
○ Depressed center wheel (10pcs. per package)
7" (180 mm) external dia. × 1/4" (6 mm) thickness ×
7/8" (22.23 mm) hole dia.
9" (230 mm) external dia. × 1/4" (6 mm) thickness ×
7/8" (22.23 mm) hole dia.
NOTE
Specifi cations are subject to change without any
obligation on the part of the metabo HPT.
14
MODIFICATIONS

ACCESSORIES

(Code No. 701070)
(Code No. 701090)
metabo HPT Power Tools are constantly being
improved and modifi ed to incorporate the latest
technological advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.