Accessories; Standard Accessories; Optional Accessories - Metabo HPT GP 2S2 Instructions De Sécurité Et Mode D'emploi

WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories.
Never use replacement parts or accessories which are not intended for use with this
tool. Contact metabo HPT if you are not sure whether it is safe to use a particular
replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury
or mechanical damage.
NOTE Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

(1) Wrench (43/64"(17 mm)) (Code No. 936638) ...........1
(2) Wrench (15/32"(12 mm)) (Code No. 936553) ...........1
(3) Side Handle (Code No. 329758) ..............................1

OPTIONAL ACCESSORIES

○ Collet chuck (for 1/8"(3.175 mm) shaft)
Dimensions and handling methods other than the
shaft hole are the same as those for the 1/4"(6 mm)
collet chuck.
○ Case
NOTE
● Specifi cations are subject to change without any
obligation on the part of the metabo HPT.

ACCESSORIES

......sold separately
English
13