Accessories; Standard Accessories - Metabo HPT G 13SC2 Instructions De Sécurité Et Mode D'emploi

NOTE
Use metabo HPT carbon brush No.43 indicated in
Fig. 5.
○ Replacing a carbon brush:
Remove the brush cap (Fig. 1) with a slotted
screwdriver. The carbon brush can then be easily
removed.
5. Replacing supply cord
If the supply cord of Tool is damaged, the Tool must
be returned to metabo HPT Authorized Service
Center for the cord to be replaced.
6. Service and repairs
All quality power tools will eventually require servicing
or replacement of parts because of wear from normal
use. To assure that only authorized replacement
parts will be used, all service and repairs must
be performed by a metabo HPT AUTHORIZED
SERVICE CENTER, ONLY.
WARNING
NEVER use any accessories other than those mentioned below.
The use of any accessories other than those mentioned below or attachments not intended for use
such as cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

○ Depressed center wheel............................................................................................................................................ 1
5" (125 mm) external dia. × 1/4" (6 mm) thickness × 7/8" (22 mm) hole dia. (Code No. 701050 or 326205)
○ Wrench (Code No. 937913Z) .................................................................................................................................... 1
○ Side Handle (Code No. 956633)................................................................................................................................ 1
NOTE
Specifi cations are subject to change without any obligation on the part of the metabo HPT.
7. Service parts list
CAUTION
Re p a i r, m o d i f i c a t i o n a n d i n s p e c t i o n o f
metabo HPT Power Tools must be carried out by
a metabo HPT Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance.
In the operation and maintenance of power
tools, the safety regulations and standards
prescribed in each country must be observed.
MODIFICATIONS
metabo HPT Power Tools are constantly being
improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.

ACCESSORIES

English
13