Trix 56 Serie Mode D'emploi page 11

CV Discription
1 Address
2 PoM Minimum Speed
3 PoM Acceleration delay
4 PoM Braking delay
5 PoM Maximum speed
8 Factory Reset / Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part)
18 Extended address (lower part)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128
29 Bit 2: DCC operation with braking area
(no analog operation possible)
Bit 5: Address length 7 Bit / 14 Bit
63 PoM Volume
PoM Program on the Main; must be supported by the controller
*** The values for the desired settings must be added.
All manuals and user guides at all-guides.com
DCC Value Factory-Set
1 - 127 3
0 - 255 19
0 - 255 5
0 - 255 5
0 - 255 255
8 131
0 - 255 1
0 - 255 1
CV 29, Bit 5 =1 192
CV 29, Bit 5 =1 128
0 - 255 0
0 - 255 0
0 - 255 0
0 / 1
0 / 2
6
0 / 4
0 / 32
0 - 255 255
11