Electrolux GA60LI220 Notice D'utilisation page 6

6 electrolux
1 Display
2 On/off button
3 Indicators
4
Delay start button
5 Programme buttons
6 Function buttons
Washing phase indicator. It comes on when the washing and rinsing phases op-
erate.
Drying phase indicator. It comes on when the drying phase operates.
End indicator. It comes on when the washing programme is completed.
Multitab indicator. It comes on when you activate the function.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.
1)
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The washing programme time
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The delay start time
• The alarm codes.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
matically deactivates the appliance. This
helps to decrease energy consumption.
Delay start button
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
All manuals and user guides at all-guides.com
Indicators
Programme buttons
Press one of these buttons to set a wash-
ing programme. The related indicator
comes on. Refer to 'Washing programmes'.
Function buttons
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Activate and deactivate the multitab func-
tion. Refer to 'Multitab function'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
• Cancel a washing programme in opera-
tion. Refer to 'Select and start a washing
programme'.
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the multitab
function.
1)