General Safety Instructions - Festool PLANEX LHS 225 E Notice D'utilisation D'origine

Long reach sander P L A N E X LHS 225
The specifi ed illustrations are at the beginning of
the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Wear a dust mask!
Wear ear protection.
Clean the air vent slits and dust fi lter
Read the Operating Instructions/Notes!
2 Technical data
Power
Rotational speed
Sanding pad dia.
Abrasive dia.
Tool holder
Dust extractor connection dia.
Length of short version (without extension pipe)
Length of long version (with extension pipe)
Weight without cable
Short version
Long version
Protection class
3 Machine features
[1-1] Sanding head
[1-2] Extension pipe
[1-3] Handle section
[1-4] Abrasive
[1-5] Mains power cable
4 Intended use
The P L A N E X is designed for sanding primed
drywall constructions, ceilings and walls in inter-
nal and external applications as well as removing
carpet residue, coats of paint, coverings, adhesives
and loose plaster.
 When sanding large fi lled surfaces with high
dust development, we recommend the Festool
14
The user bears the responsibility for damage and
accidents caused by improper use.
5
5.1
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2
- This machine is designed for sanding. Please
read all of the safety information, instructions,
illustrations and descriptions delivered with the
machine. If the following instructions are not
observed, this can result in an electric shock,
fi re and/or serious injury.
550 W
- Do not use this machine to perform work such
340 – 910 rpm
as roughing, brushing, polishing or disc sand-
215 mm
ing. Performing tasks for which the machine
225 mm
is not designed can create hazards and lead to
D 13/10
injury.
36 mm
- Never use accessories that were not specially
(27 mm)
developed and intended for this machine. Just
because an accessory part can be fi tted on your
1.10 m
machine does not guarantee danger-free opera-
tion.
1.60 m
- The permissible rotational speed of the acces-
sory must be at least as high as the maximum
3.80 kg
speed specifi ed on the machine. Accessories
4.60 kg
that rotate faster than the permissible level can
II/
rupture.
- The outside diameter and the thickness of acces-
sories must be within the specifi ed size range of
the machine. Accessories with incorrect dimen-
sions cannot be suffi ciently protected or controlled.
- The bore diameter of discs, fl anges, support
plates and all other accessories must fi t the
machine spindle exactly. Accessories with an
unsuitable diameter are out of round, vibrate
excessively and lead to loss of control.
- Do not use damaged accessories. Before use,
always check accessories such as sanding pads
for nicks or cracks and check support plates
for cracks and excessive wear. Every time the
machine is dropped, check the machine and
accessories for damage, or install undamaged
accessories. Following the check and assembly
mobile dust extractor CTL/M 36 E AC P L A N E X .
Safety instructions

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
Machine-related safety instructions