Table Des Matières; Safety Rules; General Safety Instructions - Festool ROTEX RO 125 FEQ Guide D'utilisation

Contents
Safety rules .................................................... 3
General safety instructions ............................ 3
Machine-related safety instructions .............. 4
Metal processing ............................................ 5
Technical data ................................................. 5
Symbols .......................................................... 5
Intended use ................................................... 5
Electrical connection and operation ............... 6
Extension cord ................................................. 6
Electronic control ........................................... 6
Tool settings ................................................... 7
Dust extraction ................................................ 7
Edge protector ................................................ 7
Sanding motion ............................................... 7
Choice and installation of sanding pads ......... 8
Attaching the abrasive .................................... 8
Securing polishing attachments ..................... 8
Working with the tool ...................................... 9
Systainer ........................................................ 9
Maintenance and care ................................... 10
Accessories, tools ......................................... 10
Warranty ....................................................... 10
Table A: Sanding ........................................... 12
Table B: Polishing ......................................... 12

Safety rules

General safety instructions

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2 ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or ground-
ed.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3 PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the infl uence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal in-
jury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non skid safety shoes, hard hat, or
hearing protection used for appropriate condi-
tions will reduce personal injuries.
3