Chauvet Scorpion 3D RGB Manuel D'utilisation page 20

5. T
ECHNICAL
Product
Maintenance
Page 20 of 60
All manuals and user guides at all-guides.com
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. To maintain
optimum performance, clean the product at least twice a month. Note: Use and
environmental conditions may contribute to increasing the cleaning frequency.
To clean the product:
• Unplug the product from power.
• Wait until the product is room temperature.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
• Clean the glass surfaces with a mild soap solution, ammonia-free glass cleaner, or
isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Softly wipe any dirt or grime to the outside edges of the glass surface.
• Gently polish the glass surfaces until they are free of haze and lint.
Always dry transparent surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could
damage it.
Scorpion™ 3D RGB User Manual (Rev. 3)