Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
For safety reasons, always unplug the machine at the end of the programme.
To avoid electric shocks, do not unplug the unit when your hands are wet.
Always unplug your dishwasher from the socket. Never pull the power cable itself.
Installation under a worktop
If you want to install your dishwasher under a worktop, make sure you have enough space
under the worktop and that the electrical and plumbing systems allow it.
there is sufficient space under your kitchen worktop to install your dishwasher, remove the
2
dishwasher worktop as shown.
1
598
97
Warning:
The horizontal support under which the dishwasher is installed by taking
out its worktop must be stable to avoid any lack of balance.
1
If you find that
2
8
EN
B
Using the appliance
To remove the worktop from the dishwasher, remove the screws holding the worktop in place
at the back of the dishwasher. Then push the panel 1 cm towards the back and lift it up.
Adjust the legs of the dishwasher according to the slope of the floor and the level.
your dishwasher by pushing it underneath the worktop, ensure that it the pipes are not bent
or crushed.
H
4
Without isolation
All products
Height
820 mm
Warning:
Once the worktop has been removed, the dishwasher must be placed in
an enclosed space of the dimensions shown (see fig. 4).
3
Product
With isolation
For the 2
rack
For the 3
nd
830 mm
835 mm
9
EN
3
Install
rack
rd
Publicité
