Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
NOTE
Do not open the door until the programme has finished.
At at the end of the washing programme, you can leave the door of your
appliance ajar to speed up the drying process.
If the appliance door is opened or the power is cut off during the wash, the
programme will continue when the door is closed or the power is restored.
Alarm check (depending on the model)
To change the alarm sound level, proceed as follows:
1.
Open the door and press the Option (6) and Select (7) buttons simultaneously for 3
seconds.
When the sound setting is recognised, the alarm lets out a long tone and the unit dis-
2.
plays the last set level from "S0" to "S3".
3.
To decrease the sound level, press the Select button (7). To increase the sound level,
press the Options (6) button.
To save the selected sound level, turn off the appliance.
4.
The S0 level means that all sounds are disabled. The factory setting is S3.
Energy saving mode
To activate or deactivate the power saving mode, follow these steps:
1.
Open the door and press the Programme (2) and Option (6) buttons simultaneously for
3 seconds.
2.
After 3 seconds, the unit displays the last setting, "IL1" or "IL0".
When the power save mode is activated, "IL1" is displayed. In this mode, the interior
3.
light (if available) is switched off 2 minutes after the door is opened, and the unit is
switched off after 15 minutes of inactivity to save energy.
4.
When the power save mode is disabled "IL0" is displayed. If the energy saving mode
is disabled, the interior lights will be on as long as the door is open, and the appliance
will always be on unless it is switched off by the user.
5.
To save the selected setting, turn off the appliance.
In factory setting, the power save mode is activated.
28
EN
B
Using the appliance
Natural ion technology (depending on the model)
This function provides additional hygiene through the use of ion technology. It works as an
independent programme. This function is activated by pressing the Options (6) button for 3
seconds in the ready state. After 3 seconds, "ION" is displayed to indicate that the natural
ion technology has been activated. Release the button once "ION" is displayed. Without user
intervention, 24 hours after the natural ion technology is activated, it is automatically cancelled.
NOTE
If the device is switched off, the natural ion technology is cancelled.
Natural ion technology does not work with all programmes.
Crystalight (depending on the model)
This technology, which combines ion and light technologies, provides additional hygiene. It
eliminates unpleasant odours during a washing programme that includes a drying stage.
The Crystalight function is activated and deactivated before starting the programme by pressing
the Options button (6) for 6 seconds. After 6 seconds, "ION" is displayed to indicate that
the Crystalight function has been activated. When it is deactivated, after 6 seconds, "U0" is
displayed. The Crystalight setting follows the natural ion technology setting.
The default setting is "U0".
NOTE
If the user does not deactivate the Crystalight function at the end of the
programme, it will remain active until the machine is switched off.
If the Crystalight function or the natural ion technology is active, the natural
ion technology warning LED lights up slightly when the door is opened.
29
EN
Publicité
