Publicité
Les langues disponibles
Les langues disponibles
The One-touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
NOTES:
• If you wish to watch the DVD playback
during the recording or the OTR, press
DVD to change to DVD mode and
perform the DVD playback.
• The channel cannot be changed
during recording.
All manuals and user guides at all-guides.com
One-touch Timer Recording (OTR)
Preparation:
•
Press TV/VCR to select the TV/VCR mode.
Example: One-touch Timer Recording for 30 minutes.
1
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
2
Press SPEED to select the desired tape
speed SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
3
Set the TV/CABLE option to the appropriate position (see
page 22).
4
Press the number buttons (0-9) or
CH + / – to select the channel to be
recorded.
5
Press REC/OTR. Press the button again to stop recording after
30 minutes. Each additional press of REC/OTR will increase
recording time as shown in the chart below, up to a maximum of
6 hours. The OTR and recording time will appear on the screen
for about 4 seconds.
Press
Recording time Press
once
NORMAL REC
twice
3 times
4 times
5 times
To cancel OTR
Press STOP.
"
" will appear on screen for about 4
seconds.
TV
- VHF/UHF channels
CABLE - CABLE TV channels
Recording time
6 times
3:00
0:30
7 times
4:00
1:00
8 times
5:00
1:30
9 times
6:00
2:00
10 times
NORMAL REC
00 : 00 : 00 SP
CH 110
OTR 0 : 30
CH 125
INDEX
35
Publicité
