Publicité
Les langues disponibles
Les langues disponibles
ZERO RETURN function / Video index search system
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
NOTES for Counter Display:
If you rewind the tape beyond
•
"00:00:00", a minus sign ("–") will be
displayed in front of the time.
When you load a tape, the counter
•
will reset to "00:00:00".
The counter does not function on
•
nonrecorded (blank) sections of the
tape. When you rewind, fast forward
or play tapes through blank sec-
tions, the counter stops.
NOTES for Video index search system:
When you record an INDEX mark at
•
the very beginning of the tape, the
mark may not be found.
During INDEX search, the tape may
•
stop and begin to play at a slightly
different location.
INDEX may not function properly with
•
old or worn out video tapes.
•
INDEX marks may not be found if it is
extremely close to the point where the
search began.
•
In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.
32
All manuals and user guides at all-guides.com
Preparation:
•
Press TV/VCR to select the TV/VCR mode.
1
Press DISPLAY/CALL.
The counter display shows the tape run-
ning time during playback or recording.
2
Press COUNTER RESET at the desired
tape position. The counter display will be
reset to the "00:00:00" position (e.g. the
beginning of recording).
3
Press STOP when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the "00:00:00" position.
Video index search system
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape when-
ever a recording is initiated.
Index Search
Press INDEX + or – during stop or play
mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX – .
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX + or – is pressed, the
unit starts searching the INDEX NO.
selected and finds the portion, then
playback starts automatically.
To stop the Index Search, press STOP.
TV/VCR
8 : 40AM THU
00 : 30 : 50
SP
TV/VCR
8 : 40AM THU
00 : 00 : 00 SP
CH 001
INDEX
+3
9 or 8 is displayed
INDEX NO. (up to 9)
Publicité
