Publicité
Les langues disponibles
Les langues disponibles
NOTES:
•
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
•
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
All manuals and user guides at all-guides.com
1
To turn on the unit, press
POWER.
2
Adjust the volume level by
pressing VOL + or – . The
volume level appears.
3
Set the TV/CABLE menu
option to the appropriate
position. (See page 22.)
4
Press the Direct Channel Selection
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using
two buttons. (for example, to select
channel 2, press "0", then "2". If you
press only "2", channel selection
will be delayed for a few seconds.)
For channels 10 and above, press
the 2 digits in order.
CATV Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
TO SELECT CABLE CHANNELS:
1-9:
10-12:
13-99:
100-125: Press the 3 digits in order. Example, to select channel
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
TV operation
TV
CABLE - CABLE TV channels
Press "0" twice, then 1-9 as needed. Example, to
select channel 2, press "002".
Press "0", then the remaining 2 digits. Example, to
select channel 12, press "012".
Press the 2 digits in order. Example, to select channel
36, press "36".
120, press "120".
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
VOLUME
32
- VHF/UHF channels
+0
+0
CH 02
19
Publicité
