Publicité
Les langues disponibles
Les langues disponibles
The exact arrangement you use to interconnect various video and audio components to the unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
Using an Audio Amplifier
Rear of unit
Audio (L) Output
Audio (R) Output
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as
shown below.
Rear of unit
Coaxial Digital
Audio Output
Coaxial digital cable (not supplied)
To Coaxial Digital
Audio Input
AV Amplifier with built-in digital surround
decoder as listed above
*
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
*
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTES:
•
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON
on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or
causing the speakers to be damaged.
•
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
All manuals and user guides at all-guides.com
Connections to other equipments
To Audio (R) Input
AUDIO cord (not supplied)
Front
Speaker
(Left)
Amplifier
To Audio (L) Input
Subwoofer
TV
Center Speaker
Surround
Speaker (Left)
Front
Speaker
(Right)
Surround
Speaker
(Right)
13
Publicité
