Allmatic RX220/2/16M Manuel D'instructions page 2

1. DESCRIPTION
The interface model BA. RX220/2/16M is a power supply interface and power relay for the receivers with molex connector of the
Allmatic Led series. The interface enables to power a receiver directly from the electric line 230Vac - 50 Hz and supply two dry output
contacts up to 16A 230Vac. Both normally and closed contacts are available for a maximum flexibility of use.
2. CONFIGURATION AND CONNECTIONS
Line Fuse
T 50mA
3. TRANSMITTERS LEARNING
For the learning of the transmitters and the functioning setting, please refer to the instructions of the used receiver.
4. DISPOSAL OF THE PRODUCT
This product is an integral part of the automation, and therefore, they must be disposed of together. As for the installation operations,
at the end of the life of this product, the dismantling operations must be performed by qualified personnel. This product is made from
different types of materials: some can be recycled, others must be disposed of. Please inform yourselves on the recycling or disposal
systems provided for by the laws in force in your area, for this category of product.
CAUTION! – some parts of the product can contain polluting or dangerous substances which, if dispersed in the
environment, may cause serious harm to the environment and human health. As indicated by the symbol at the side, it is
forbidden to throw this product into domestic refuse. Therefore, follow the "separated collection" instructions for disposal,
according to the methods provided for by local regulations in force, or redeliver the product to the retailer at the moment of
purchase of a new, equivalent product.
CAUTION! – the regulations in force at local level may envisage heavy sanctions in case of abusive disposal of this
product.
5. GUARANTEE
In compliance with legislation, the manufacturer's guarantee is valid from the date stamped on the product and is restricted to the repair or free
replacement of the parts accepted by the manufacturer as being defective due to poor quality materials or manufacturing defects. The guarantee
does not cover damage or defects caused by external agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product,
assembly errors, or any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed or repaired.
Printed specifications are only indicative. The manufacturer does not accept any responsibility for range reductions or malfunctions caused by
environmental interference. The manufacturer's responsibility for damage caused to persons resulting from accidents of any nature caused by our
defective products, are only those responsibilities that come under Italian law.
2/4
BA. RX220/2/16M
230Vac
ITA ENG
MOLEX
RECEIVER
FRA ESP
6-1620161 rev2 06/12/2022