Mopar 82211442 Serie Instructions D'installation page 6

d. Reinstall the secondary lock.
e. Reinstall the "B" connector back into the TIPM.
6. Reinstall the TIPM
a. Reinstall the TIPM onto the TIPM mounting bracket by en-
gaging the (3) locking tabs.
WCM Replacement
** Orginal WCM must be removed and the new WCM must be installed **
1. Refer to the vehicle Service Manual section 8 Electrical/
Starting/Remote Start Antenna Module/Installation - for
WCM replacement.
All manuals and user guides at all-guides.com
Secondary Lock
6 of 9
Locking Tabs