Publicité
Les langues disponibles
Les langues disponibles
4. Access the connectors on the bottom of the TIPM
a. Access the connectors underneath the TIPM by disengaging the
(3) locking tabs and lifting upwards.
5. Connect the hood switch wire
a. Remove the gray "B" connector from the TIPM.
** Note: Connectors are labeled on the edge of the TIPM near the connectors.
b. Remove the secondary lock from the "B" connector.
c. Insert the Violet/White hood pin switch wire into the G70 cir-
cuit, cavity 11.
Terminal Side View
All manuals and user guides at all-guides.com
"B" Connector
Secondary Lock
Cavity 11 Harness End View
5 of 9
Locking Tabs
Publicité
