Mopar 82211442 Serie Instructions D'installation page 3

Disconnect Ground From Battery
1. Remove ground from battery
a. Using a 15 mm socket, remove the negative battery cable.
Hood Switch Harness Installation
1. Routing of the hood switch
harness
a. Connect the hood switch harness
to the hood switch.
b. Route the Violet/White wire of the hood switch
harness across the upper radiator support towards
the TIPM, securing to the exsisting factory harness
with (5) wire wraps.
All manuals and user guides at all-guides.com
Battery Ground
3 of 9
Wire Wraps x 5