VERTBAUDET 1003149-0609 SA CLEVER STROLLER Notice D'utilisation page 67

GB
4.7 Removing and installing the cushion
Step 1
Refer to paragraph 4.2 - the three-point seat belt
buckle operating procedure - to open the buckle.
Step 2
Remove the shoulder straps in the direction indicated
by the arrow.
Step 3
Then remove the strap from the hole above the inner
lining.
Step 4
Finally, separate the reducer cushion from the car seat.
Carry out the process in reverse order to install the
inner reducer cushion.
31
11