Miele Scout RX1-5113 Mode D'emploi page 15

Finishing vacuuming manually
^ Press the Power button on the
remote control.
The robot vacuum cleaner will switch to
standby automatically after approx.
60 seconds. The display will be
deactivated. The battery capacity
status indicator will continue to light up.
You can switch the robot vacuum
cleaner to standby before 60 seconds
is up by pressing the Power button
again.
You can reactivate the robot vacuum
cleaner by pressing any button on the
remote control or one of the two sensors
in the robot vacuum cleaner display.
Vacuuming modes
There are four different vacuuming
modes.
Auto Standard vacuuming mode
for vacuuming normally
soiled flooring.
Spot For targeted vacuuming of a
surface approx. 5' 11" x 5' 11"
(1.8 m x 1.8 m) around the
selected starting point of the
robot vacuum cleaner.
Corner For vacuuming normally
soiled flooring (see Auto).
Additional edge vacuuming
after returning to the starting
point.
Turbo For vacuuming lightly soiled
flooring with a short
vacuuming duration.
Selecting the vacuuming mode
^ Press the Power button on the
remote control.
There are two ways of selecting the
vacuuming mode.
Option 1 (Remote control)
^ Press the button for the vacuuming
mode you want. The corresponding
vacuuming mode symbol will light up
in the display.
^ To start vacuuming, press the ~ II
button on the remote control or the
~ II sensor in the display.
en
15