Hilti NURON CD 4-22 Mode D'emploi Original page 24

▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
24
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1 Overview 1
3.2 Intended use
The product described is a cordless dispenser. It is designed for use with foil packs up to 600 ml and 300 ml
or 310 ml cartridges.
The product can be operated with a plastic or aluminum cartridge holder:
▶ For this product, use only the Hilti plastic cartridge holder set with included piston rod: For processing
cartridges.
▶ For this product, use only the Hilti aluminum cartridge holder set with included piston rod: For processing
foil packs.
18 English
Connecting sleeve
@
Securing screws for scaffold hook
;
Scaffold hook
=
Speed control wheel
%
Grip
&
Installation opening for accessories
(
Battery
)
Battery status indicator
+
Battery release button
§
Work-area light (LED)
/
Switch
:
Piston-rod release button
∙
Cartridge holder
$
Short piston rod
£
Ergonomic grip
|
Securing screw for ergonomic grip
¡
Hex key for the scaffold hook and grip
Q
Front cap
W
Aluminum tube
E
Piston attachment for processing foil packs
R
Long piston rod
T
2293541
*2293541*