Hilti NURON CD 4-22 Mode D'emploi Original page 23

Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2 Additional safety instructions
Personal safety
▶ Never tamper with or modify the product or accessories in any way.
▶ Use the product and accessories only when they are in perfect working order.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶ A falling product could injure you or others. Make sure that the scaffold hook is installed correctly.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶ The user and persons in the vicinity must wear suitable eye protection, a hard hat, ear protection,
protective gloves, protective footwear and light respiratory protection during use and maintenance of the
tool.
▶ Wear eye protection and protective gloves when changing accessories.
▶ Wear eye protection and then begin the injection with the slowest speed.
▶ Prior to use, read and comply with the safety data sheet for the product, the instructions on the packaging
and the instructions for use of the foil pack.
▶ Begin injecting the compound until it is in the immediate working area.
▶ Never point the product toward yourself or other persons.
▶ Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons' faces. Risk of dazzling or eye damage.
▶ Never leave the product unattended.
▶ Do not use the product if parts are damaged or if operating controls do not function faultlessly. Have the
product repaired by Hilti Service.
Safety at the workplace
▶ Keep the workplace tidy. Objects which could cause injury should be removed from the working area.
▶ Wear non-skid shoes.
▶ Take the influences of the surrounding area into account. Do not use the product where there is a risk of
fire or explosion.
▶ Do not use defective/worn cartridges.
2.3 Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
*2293541*
2293541 English 17