Hilti RC 4/36 Mode D'emploi Original page 19

All manuals and user guides at all-guides.com
1.3 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial number:
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety
2.1 General safety instructions
WARNING! Read all instructions! Failure to follow all instructions listed below can result in electric shock,
fire and/or serious injury. Keep these instructions in a handy yet secure place.
Workplace
▶ Ensure that the workplace is well lit.
▶ Do not tamper with or attempt to make alterations to the appliance.
▶ The charger is not designed for wall mounting.
▶ Keep your work area clean and well lit. Cluttered or poorly lit work areas invite accidents.
▶ Do not operate the charger in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Chargers can cause sparks which can ignite dust, fumes or vapors.
▶ Keep children and other persons away from the area while the charger is in use.
▶ Always stow the battery charger securely to prevent it sliding about in a vehicle during transport.
Electrical safety
▶ The plug on the supply cord of the appliance must match the outlet. Do not change the plug in any way.
Unmodified plugs and matching power outlets reduce the risk of electric shock.
▶ Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cookers, stoves and
refrigerators. There is an increased risk of electric shock if your body is grounded.
▶ Do not abuse the cord. Never use the cord to carry or hang up the power tool or to pull the plug out of
the power outlet. Keep the cord well away from heat, oil, sharp edges and moving parts. Damaged or
twisted supply cords increase the risk of electric shock.
2142553
*2142553*
Printed: 20.07.2018 | Doc-Nr: PUB / 5296507 / 000 / 03
Switch Bluetooth on at your external device and wait for it to find the Hilti
Radio Charger.
Select the Hilti Radio Charger at your external device and pair the two de-
vices.
RC 4/36 | RC 4/36-DAB
01
English 15