Publicité
Les langues disponibles
Les langues disponibles
Extended Applications
You can increase the distance from the HDMI Source to the Display beyond the maximum limit
by using a Tripp Lite HDMI Extender (Model: B122-000). Simply insert the B122-000 HDMI
Extender between the B119-302-R Switch and the Display, and connect using Tripp Lite P568-
Series HDMI cables. (For more information, see the B122-000 HDMI Extender Owner's Manual)
The diagram below shows the preferred set-up for an extended application:
P568-016
B119-302-R Switch
Troubleshooting
If you experience problems with the Audio/Video display from the B119-302-R Switch, try the
following steps:
• Make sure you have not exceeded the maximum cable lengths (shown in these instructions). If
you've exceeded these lengths, use shorter cabling.
• Connect an HDMI cable directly between the source(s) and the display to verify the cable is
operating. Repeat to test all cables.
If the source(s) and the display do not work properly:
• Try using a cable that you know to be operational. If this still does not work, then the problem
lies with either the source(s) or the display.
If the source(s) and the display are operating properly:
• Test each of the ports on the B119-302-R Switch individually, using the source(s), display and
cables that you have just tested and found to work properly. Connect a functioning HDMI cable
between the B119-302-R Output Port and a functioning Display. Connect a functioning source
and Input Port-1 of the B119-302-R Switch using a functioning HDMI cable. Repeat this step for
Input Port-2 of the B119-302-R Switch. If both ports work correctly, the B119-302-R Switch is
functioning properly. If one or both ports are not working (or if none of these steps have resolved
the problems), contact Tripp Lite Technical Support at +1.773.869.1234.
All manuals and user guides at all-guides.com
Any Tripp Lite
P568 Series Cable
P568-016
up to 100 ft.
B122-000
HDMI Extender
3
Display
Publicité
