NORAUTO 2274434 Informations De Sécurité page 44

Siège enfant 15-36 kg

Les langues disponibles

CLICK

WARNING: If lap and shoulder belt portions of seat belt and seat belt buckle are not all

correctly positioned, restraint is not properly installed as a booster seat.

NOTE: Test by pulling on the child restraint and shoulder belt to ensure it is locked.

SECURING THE CHILD

WARNING: If your child is not properly secured in the child restraint, they may be ejected in

a crash, resulting in serious injury or death.

Place your child in the child restraint in a seated position.

2. The child should be seated against both the back and bottom of the seat with no gap

behind the child. Do not allow the child to slouch.

3. Pull the vehicle belt. Pull the vehicle belt. Pull the vehicle belt. Route the lap belt portion

under the armrests to the vehicle belt buckle. Insert the 3-point vehicle belt in the

buckle until you hear a click.

• A child restraint positions your child so that the seat belt fits across the strong bones of

the hips and pelvis and not the abdomen, to protect your child from injury.

• The shoulder portion of the seat belt should be positioned over the chest and collarbone,

staying between your child's neck and shoulder so that it does not touch the neck.

CARE, CLEANING AND MAINTENANCE, STORAGE

• WARNING: It's dangerous to make any alterations or additions to the device without

the approval of the Type Approval Authority, also dangerous not to follow closely the

installation instructions provided by the child restraint manufacturer.

• WARNING: Do not attempt to disassemble the child restraint further than these

instructions allow.

• WARNING: All car seats expire. Plastic and metal parts wear out over time. Contact the

manufacturer if you are unsure when your seat expires.

• When the chair is not provided with a textile cover, the chair should be kept away from

sunlight, otherwise it may be too hot for the child's skin. Although, the child restraint

must not be used without the cover. The seat cover should not be replaced with any

other than the one recommended by the manufacturer. The cover constitutes an

integral part of the restraint performance.

• Check regularly if everything functions properly.

• If any parts are torn, broken, or missing, stop using this product.

• DO NOT attempt to remove the foam under the seat pad.

• Keep the child restraint clean.

• Do not use abrasive cleaning agents or hard objects during cleaning as these can

damage the product.

• Removable fabric covers and trims may be cleaned using warm water with a household

soap or a mild detergent.

CLICK