DeWalt DE3000 Manuel D'instructions page 25

up by the teeth of the saw blade and thrown in the air.
• Do not remove the riving knife.
• Do not saw firewood.
• Do not reach around behind the saw blade.
Using routers in a fixed position
• Fit a lightweight mask over your nose and mouth, when routing for a
lengthy period.
• Use protective goggles when routing particle board.
• After work, release the router carriage to protect the cutter.
Package contents
The package contains:
1 Aluminium frame with no-volt release switch
4 Legs
DE3000
1 Saw mounting plate
3 Fixing screws
1 Parallel rip fence
1 Mitre fence
4 Cutting inserts (saw)
1 Saw blade guard with bracket
1 Push stick
1 Mounting device for DW365
1 Switch lock
DE2000
1 Router mounting plate incl. mounting device
3 Fixing screws
1 Router fence with dust spout
1 Cutter guard
4 Cutting inserts (router)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
Description (fig. A1 - A3)
Your stable and rigid DE3000/DE2000 combi-table has been designed to
extend the versatility of your circular saw or router, enabling them to be
used in a stationary mode.
Fig. A1 - Combi-table
1 No-volt release switch
2 Socket
3 Fine adjustment clamp
4 Fine adjuster
5 Locking screw (front)
6 Locking screw (back)
7 Star knob
8 Leg
9 Thumbscrew
10 Scale
11-14 Slide rail
15-16 Dovetail grooves
17 Push stick holder
Fig. A2 - DE3000
17
All manuals and user guides at all-guides.com
18 Saw mounting plate
19 Fixing screws
20 Parallel rip fence with profile (49)
21 Sliding mitre fence
22 Push stick
23 Cutting insert
24 Dust spout
25 Adjustable saw blade guard
26 Dust guard holder
Fig. A3 - DE2000
27 Router mounting plate
28 Fixing screws
29 Router fence with faces (40)
30 Transparent cutter guard
31 Cutter guard bracket
32 Cutting insert
33 Dust spout
We recommend the following saws for use with the DE3000 saw table:
Elu MH85
Elu MH151
Elu MH165
Elu MH265
Elu MH286
We recommend the following routers for use with the DE2000 router table
(all models: construction year from 1990):
Elu MOF96
Elu OF97
Elu MOF131
Elu MOF177
With the optional mounting kit (DE2010), the D
also accepts most of the common routers in the market and older D
models.
Mains plug replacement (U.K. & Ireland only)
• Should your mains plug need replacing and you are competent to do
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug with bared copper
• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly
• The cable wire colours, or a letter, will be marked at the connection
• Before replacing the top cover of the mains plug ensure that the cable
D WALT DW62
E
D WALT DW86
E
D WALT DW286
E
D WALT DW365
E
D WALT DW383
E
D WALT DW613
E
Do not mount any power tools not specified in this list.
this, proceed as instructed below. If you are in doubt, contact an
authorized D WALT repair agent or a qualified electrician.
E
conductors is dangerous if engaged in a live socket outlet.
rated fuse (1).
points of most good quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live (L) (2) and Blue is for
Neutral (N) (4).
restraint (3) is holding the outer sheath of the cable firmly and that the
two leads are correctly fixed at the terminal screws.
E N G L I S H
Metabo KsE 1668s-Signal
Metabo Ks 1468 S
Metabo Ks 1255 S
Bosch GKS 65
Bosch GKS 66 CE
WALT router table DE2000
E
WALT-
E
en - 2