Hansgrohe AXOR Starck 10821 1 Série Instructions De Montage / Mode D'emploi / Garantie page 8

2
!
3
4
8
2
1
English
Install the handspray hose and handspray.
Push the spout onto the faucet body so that the pin
goes into the hole on the rear of the spout.
Place the faucet and sealing ring on the mounting
surface.
Install the plastic washer, friction washer, metal
washer, and mounting nut.
If the mounting surface is greater than 1¾", or if there
is insufficient space, omit the plastic washer.
Tighten the mounting nut.
Tighten the screws.