Hansgrohe AXOR Starck 10821 1 Série Instructions De Montage / Mode D'emploi / Garantie page 16

1
2
3
16
9 m
m m
m
1 6
9 mm
16 mm
English
10826xx1 Installation
Place the faucet on the mounting surface.
Install the support, friction washer, metal washer, and
mounting nut.
If the mounting surface is greater than 1¾", or if there
is insufficient space, omit the support.
Tighten the mounting nut. Tighten the tensioning
screws.
Connect the hot and cold supply hoses to the
supplies.
Use two wrenches, as shown in the
diagram. Do not allow the hoses to
twist.
For proper operation of the faucet, the hot supply
should be on the left and the cold supply should be
on the right.