Publicité
Les langues disponibles
Les langues disponibles
HU 8005
INTRODUCTION
• A special set for refilling fluid such as ATF, gear oil and differential oil Required for several types
of vehicles without transmission dipstick tube (e.g. Volkswagen, Audi, Ford,Toyota, Mercedes-
Benz and Volvo)
• 12.5 liter tank with both manual and pneumatic functions (patent pending)
• 1500mm-long RoHS PVC filling hose with a quick coupler that can be connected with filling
adapters
SAFETY
• Read the instructions carefully before working on the refilling process
• Wear eye and skin protection, and always keep working areas clean
• Keep children and any flammable objects away from working areas
• Clean the tank and your skin (esp. hands) after using the tank with fluids or solvents
• Release pressure in the tank by pulling the square handle after work
• Adjust pressure regulator and observe pressure reading carefully when refilling
• Adjust the automatic release adapter if necessary and carefully follow the correct steps.
Screw the hex-inside nut clockwise to increase pressure
- increase pressure setting, e.g. 14.2 psi to 18.5 psi (fig.1)
Screw the hex-inside nut counter-clockwise to decrease
pressure
- decrease pressure setting, e.g. 14.2 psi to 12.8 psi
SPECIFICITY
• 12.5 L
• Material: Polyethylene (PE)
• NOT suitable for fuels or solvents
• Temperature range: 40°C/ – 80°C
• Max. pressure: 7bar
All manuals and user guides at all-guides.com
GEARBOX REFILLING DEVICE WITH ADAPTERS
Fluid control
valve
RoHS PVC hose
Ø12.5×Ø16×L1500mm
(Ø0.49×Ø0.63×59.05 in)
Publicité
