TFA LOOK Mode D'emploi page 9

TFA_No. 35.1123_Anleit_01_23 19.01.2023
LOOK – Wireless weather station
7.3 Alarm setting
• Press and hold ALARM button.
• "AL" appears on the display.
• The hour digit is flashing. Press UP or DOWN button to adjust hours.
• Press ALARM button again and you can adjust the minutes with the UP or DOWN button.
• Holding UP or DOWN button, you will enter fast mode.
• Confirm with ALARM button and the display shows the current time.
• Press ALARM button again and the alarm function is activated.
• appears on the display.
• Once the alarm starts to ring, flashes.
• Press any button to stop the alarm.
• You can activate the snooze function by pressing the SNZ button.
• and are flashing and the alarm will be interrupted for 5 minutes.
8. Thermometer and hygrometer
8.1 Display change °C/°F
• Press DOWN button to change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
8.2 Trend pointer
• The trend pointer displayed on the LCD indicates if the temperature is increasing, steady or
decreasing.
8.3 Comfort level
• On the display appears a smiling, normal or sad face icon to indicate the comfort level of indoor
climate.
8.4 Weather forecast symbols
• There are 4 different weather symbols (sunny, slightly cloudy, cloudy, rainy).
• The weather symbol is based on the changes of humidity values.
8.5 Maximum/minimum function
• Press MAX/MIN button to show the maximum (MAX) values of indoor temperature and humidi-
ty and outdoor temperature. Press MAX/MIN button again to show minimum (MIN) values.
• Hold MAX/MIN button for 3 seconds to clear the recorded maximum and minimum reading.
8.6 Outdoor temperature alarm (channel 1-3)
• Press the ALERT button for 3 seconds.
• and 70 °C (default) or the last adjusted upper temperature limit appear on the display.
• Press the UP or DOWN button to adjust the desired upper temperature limit.
• Confirm with the ALERT button.
• and -50 °C (default) or the last adjusted lower temperature limit appear on the display.
• Press UP or DOWN button to adjust the desired lower temperature limit.
• Confirm with the ALERT button.
16
11:30 Uhr Seite 9
LOOK – Wireless weather station
• The alarm is activated. appears on the display.
• Press the ALERT button again to deactivate the alarm function.
8.6.1 Case of alarm
• In the case of an alarm the corresponding symbol flashes
ed. You can stop the alarm by pressing any button.
8.7 Moon phase display
• The moon phase of each day is shown on the LCD.
A B C D
A: New Moon B: Waxing Crescent
C: First Quarter D: Waxing Gibbous
E: Full Moon F: Waning Gibbous
G: Last Quarter H: Waning Crescent
9. Transmitter
• The sensor will automatically transmit the outdoor values to the weather station after batteries
are inserted.
• Press °C/°F button on the transmitter to change the temperature unit on the sensor display from
°C to °F.
• After successful installation close the battery compartment of the transmitter carefully.
9.1 Additional transmitters
• For having more than one external transmitter, select different channels (1-3) for each sensor
by the switch. The new transmitter will be received automatically by the base station.
• The outdoor values measured by the sensor are shown on the display of the base station. If you
have installed more than one transmitter, press CHANNEL button to change between the out-
door transmitters.
• To cancel an unused channel hold CHANNEL button for 3 seconds. If a new channel is received
it will be automatically registered again.
10. Positioning and fixing of the basic station and the transmitter
• With the foldable leg at the back of the base station it can be placed onto any flat surface or wall
mounted at the respective location by the hanging hole at the back of the unit. Avoid the vicinity
of any interfering field like computer monitors or TV sets and solid metal objects.
• With the enclosed, mountable leg the transmitter can be placed onto any flat surface or wall
mounted at the respective location by the hanging hole at the back of the unit. Choose a shady
and dry position for the transmitter. (Direct sunshine falsifies the measurement and continuous
humidity strains the electronic components needlessly).
disappears.
and an alarm sound is activat-
E F G H
17