Chauvet Scorpion 320D EU Manuel D'utilisation page 14

Mounting
Orientation
Rigging
Page 14 of 60
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Scorpion™ 320D EU must be mounted in a position that includes planning for safe
laser usage; in addition, make sure adequate ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product can
support the product's weight (see the
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
• When power linking multiple products, always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs by hand.
Using tools could damage the knobs.
Clamp
Mounting Bracket
Bracket
Adjustment Knob
Technical Specifications).
Scorpion™ 320D EU User Manual (Rev. 2 ML)
Safety Cable/Safety Loop