Seca 704s Mode D'emploi Et Garantie page 36

9. FUNCTION CHECK
10.TROUBLESHOOTING
Problem
... the measurement is
not a plausible height?
11.SERVICING
36 •
All manuals and user guides at all-guides.com
►
Perform a function check before each use.
A complete function check includes:
• a visual inspection for mechanical damage
• a visual and function check of all moving parts
• a function check of the controls
CAUTION!
Bodily injury
If you find faults or deviations in the function
check, you may not use the device.
►
►
Measured result read off incorrectly
- Use the correct read-off edge for the current
measuring range
- Read off decimal places for the current
measuring range in the correct direction
Patient in wrong position/posture
- Correct patient's position/posture
The seca measuring rod does not require any servicing.
However, if anything ever fails to work, contact an
authorized service partner.
You can find a service partner in your area at
www.seca.com or by sending an e-mail to
service@seca.com
Have the device repaired by seca service or
an authorized service partner.
Observe the section entitled "Servicing".
Cause/solution