Seca 704s Mode D'emploi Et Garantie page 34

7. WEIGHING
8. HYGIENE TREATMENT
34 •
All manuals and user guides at all-guides.com
CAUTION!
Incorrect measurement due to force shunt
Operation of the stadiometer affects the weight
display of the scale. Weight values which are
displayed during a height measurement do not
correspond to the patient's actual weight.
►
►
►
The scale functions of the
cal to those of the
mation about this in the instructions for use supplied for
the
seca 704
The scale functions of the
cal to those of the
mation about this in the instructions for use supplied for
the
seca 703
WARNING!
Electric shock
►
►
►
►
►
►
►
Ensure that you do not touch the scale whilst
weight is being measured.
Ensure that the patient does not touch either
the stadiometer or the column of the scale
whilst weight is being measured.
Only read off weight values before or after
measuring height.
seca 704s
seca 704 model. You can find infor-
model.
seca 703s
model. You can find infor-
seca 703
model.
Set up the device so that the power supply
socket is easy to reach and the device can be
disconnected from the power supply quickly.
Ensure that your local power supply matches
the information on the power supply unit.
Do not touch the power supply unit with wet
hands.
Do not use extension cables or power strips.
Make sure that cables are not pinched or
damaged by sharp edges.
Make sure that cables do not come into
contact with hot objects.
Do not operate the device at an altitude of
more than 3000 m above sea level.
model are identi-
model are identi-