Moen Nebia Serie Guide D'installation page 5

INSTALLING THE MAGNETIC HANDSHOWER DOCK
STEP 6:
Your handshower includes a magnetic dock that you can place
wherever you like on your shower wall. You can even purchase
additional docks and place them at varying heights, depending
on your showering preferences or to accommodate different
users. Once you've selected a location, clean your shower walls
with alcohol pads and dry thoroughly — removing all soap residue.
Helpful Tip: For the best full-coverage experience, use the Nebia by Moen handshower
like a body spray and install it at hip or torso height, 8 inches to the left or right of
the bracket.
8"
Visit moen.com/nebia for tips and videos.
All manuals and user guides at all-guides.com
8"
STEP 7:
Optional mounting screws and anchors provided. See optional
steps on page 9 before installing the dock adhesive. Peel away
the adhesive liner from the back of the magnetic dock's wall bracket.
Stick it to the wall, and firmly push it in place for about 1 minute. For
optimal adhesive strength, allow to cure 24 hours before sliding the
dock onto the bracket. Slide the dock over the bracket and twist it
until you hear a "click."
1
2
4