Publicité
STEP 5
Measure the inside cabinet width
(ICW) and subtract X (See Figure
D). Take that number and divide
by 2; this is dimension "A".
"A" = (ICW - X) / 2 = ______
STEP 6
Place the left slide with side mount
bracket from Step 1 on top of left
side mount bracket from Step 4.
Insert (2) #8-32 flat head screws
and (2) lock nuts into the slots then
measure from cabinet wall to the
side mount bracket's vertical wall
until it is equal to dimension "A"
and tighten screws/lock nuts
(See Figure E).
STEP 7
Adjust the back bracket to lay
flush against the cabinet rear wall
and attach with (2) #8 x 5/8" truss
head screws (See Figure G).
Repeat steps 6-7 for the right side.
FIG. D
Overhead Cabinet View
ICW
Door
FIG. E
Cabinet Wall
FIG. G
INSTALLATION INSTRUCTIONS: SIDE MOUNT UTENSIL PULL OUT
4WDUT-18SC-SM-1: X = 13 13/16"
4WDUT-24SC-SM-1: X = 19 13/16"
Slide
Side Mount Bracket
from Step 1.
Side Mount Bracket
from Step 4.
3
Publicité
