Optika Italy B-1000 MET Manuel D'instructions page 11

6.0 MAINTENANCE
6.1 Always think about
- The following environment is required: Indoor temperature: 0-40°C, Maximum relative humidity:
85% (non condensing).
- Keep the microscope away from dust and shocks while in use.
- Turn off the light immediately after use.
- Use a soft lens tissue to clean the optics after use.
- Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water
and drying immediately with a lint-free cloth.
- After use, cover the microscope with the included dust-cover, and keep it in a dry and clean place.
6.2 Do NOT!
- Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
- Use solvents, neither on the microscope, nor on the optics.
- Disassemble objective or eyepieces to attempt to clean them.
- Mishandle or impose unnecessary force on the microscope.
- Clean the unit with volatile solvents or abrasive cleaners.
- Attempt to service the microscope yourself.
6.3 Replacement of the halogen lamp
After the lamp has been switched off it takes about 30 minutes before it is cool enough to be
repla-ced.
Disconnect any cable from the epiilluminator.
Follow the instructions of point
7.0 ELECTRICAL SPECIFICATION
Power Supply Input :
Fuses:
Halogen Lamp:
All manuals and user guides at all-guides.com
4.4 Halogen lamp insertion in order to replace the lamp.
Always use original spare parts for lamp replacement. Do not mount lamps
with different specifications or brands.
100 - 240 V, 50/60 Hz
T250V 5A
100 W
Page 11