Meyer LEADER 32 Manuel De Mode D'emploi page 13

DE EN
6. Assembling the LEADER
The LEADER 32 must be assembled correctly before starting up.
Assembling the handlebar (2)
The handlebar is mounted using the two knobs (4) and 2 screws
(7, fig. 1).
To fix the knob from the inside, use 2 washers (10) and 2 screws
(7).
For fixing the screws from the inside, two washers (10) as well as
2 small nuts (8) are provided.
The screws firmly integrated in the handle are to be fixed with
washers (10) as well as the small nuts (8).
For this, please refer to fig. 2.
Assembling the sprinkler trolley (12)
The wheels (5) are fixed by means of washers (10) and the large
nuts (9, fig. 3). Then put on the hub caps (6).
Assembling the sector sprinkler
This is screwed onto the sprinkler trolley.
Assembling the hoses / connecting the hoses
In order to provide a functional flow of water, the reel irrigator
must be connected to the sprinkler trolley.
The hose clip provided is used for fixing.
FR ES IT
fig. 1
fig. 2
fig. 3
13